CAB Apollo Series User Manual

Apollo Hermes
command
available ?
cab Produkttechnik GmbH & Co KG 195
195
[TABLE OF CONTENTS]
[COMMAND LIST][INDEX]
[ESC][i][L][S]
PRODUCT MARKING AND BARCODE IDENTIFICATION
[?:article number]
Requests in the display for article number.
[?:article number,7733214]
Requests in the display for article number and the preset value 7733214
[?:article,screw,3]
Requests in the display for screw each three labels.
[?:article no:,7733214,3,D]
Prompts with the headline article no: and the preset value 7733214 each three labels and erases the
last input, which is only shown for the first time when the label is recalled.
[?:article,screw,,L8]
Prompts with the headline article no: and the preset value 7733214. The maximum length of input
data is limted to 8 digits.
[?:number,7733214,,M1111111]
Prompts for number with the preset value of 7733214 and masks the input for numeric values only.
[?:artno?,,1,M1114444]
Prompts for artno, has no preset value and expects 3 numeric an 4 upper case characters
Example:
Example:
Example:
Example:
Example:
Example:
Example:
[?: ... ] LCD prompt
xx

CAB Apollo Series Specifications

General

Print Technology	Thermal Transfer
Print Resolution	203 dpi, 300 dpi, 600 dpi
Max Print Width	104 mm
Interfaces	USB, Ethernet, RS232
Operating Temperature	+5°C to +40°C
Dimensions	240 mm