Instrumentation and Controls
. . . 164
To quickly set a tone control to its
middle position, press and hold
the push-button under BASS, MID
(midrange), or TREB (treble) for
more than two seconds.
You will hear one beep.
To quickly set all speaker and tone
controls to their middle positions,
press and hold the TUNE/TONE
(tune/tone) knob for two seconds.
You will hear one beep.
If a station is weak or noisy, you
may want to lower the treble tone.
For additional information on
AudioPilot, please visit bose.com/
audiopilot.
Digital Signal Processing
(If equipped)
This feature is used to provide a
choice of different listening
experiences. It can be used while
listening to the radio or the CD/
DVD Audio player.
To choose a DSP setting:
1. Press the TUNE/TONE knob
until a digital
signal processing setting
appears on the display.
2. Press the push-button under
the desired setting.
- NORMAL
This setting provides the best
overall sound quality for all
seating positions.
- DRIVER
This setting gives the driver
the best possible sound
quality.
- REAR
This setting gives the rear
seat occupants the best
possible sound quality.
- CENTERPOINT (CENTER-
POINT
®
surround)
This setting is not available
while in the AM or FM radio
bands.
This setting enables five-
channel surround sound
when listening to a CD, MP3,
DVD stereo audio or auxiliary
sources.
AKENG40_CTS Page 164 Wednesday, July 23, 2008 11:47 AM
To Next Page
Loading...
Need help?
General
