53
MC-III™ Panel Mount Flow Analyzer Section 4
Security Setup
Setting a keypad security code will prevent unauthorized personnel from altering calibration data or resetting
totals, and the security function is recommended to preserve data integrity of the system. The MC-III Panel
Mount’s keypad security feature is disabled at the factory.
To enable the security protection, check the “Keypad Lock” checkbox on the System Setup screen, and enter
a four-digit lock code in the eld below the checkbox. (Do not use “0000.”) The security feature will be
activated the next time a user attempts to access the keypad.
Firmware Version Number
As rmware is upgraded, rmware version numbers change. The rmware version number shown may assist
technical support personnel in troubleshooting an operational issue.
Serial Number
The serial number of your MC-III Panel Mount can be used to track the history of your unit to include
warranty status.
To Next Page
Loading...
