Cameron NUFLO MC-III - Wellsite Information

56
Section 4 MC-III™ Panel Mount Flow Analyzer
Wellsite Information
The Wellsite Information screen (Figure 4.20) allows users to enter information that distinguishes the wellsite,
such as company name, well name, and site location. While most of the elds on this screen are optional, a
well name should be assigned.
The well name (limited to 20 characters in length) will also serve as the name of the folder where ow logs
generated by the MC-III software will be archived. If a well name is not entered on this screen, logs will be
saved in a folder titled “NO_WELLNAME.”
Figure 4.20—Wellsite Information screen