Do's
and
Don'ts
•••
.-e
----------------------
Storage
• If you do not intend to use the
camcorder for a long time, store it
in
a
place free
of
dust,
in
low humidity, and at
temperatures not higher than
30°C
(86
OF).
Cleaning
Camcorder
Body
• Use a soft, dry cloth to clean the
camcorder body. Never use chemically
treated cloth or volatile solvents such as
paint thinner.
Pick
Up
Lens
• Remove any dust or dirt particles using
a non-aerosol type blower brush. Never
touch the pick up lens directly to clean
it.
Lens
and
Viewfinder
• If the lens surface is dirty, the autofocus
may not work properly.
• Remove any dust or dirt particles using
a non-aerosol type blower brush.
• Use a clean, soft lens-cleaning cloth to
gently wipe the lens or viewfinder. Never
use tissue paper.
LCD
Screen
• Clean the LCD screen using a clean,
soft lens-cleaning cloth.
• Condensation may form on the surface
of
the screen when the temperature,
changes suddenly. Wipe it with a soft dry
cloth.
Condensation
Moving the camcorder rapidly between
hot and cold temperatures may cause
condensation (water droplets) to form on
its internal surfaces. Stop using the
camcorder if condensation is detected.
Continued use may damage the
camcorder.
Condensation
may
form
in
the
following
cases:
When the camcorder is moved from
an
air-conditioned room to a warm, humid
place
When the camcorder is moved from a
cold place to a warm room
When the camcorder is left
in
a humid
room
When a cold room is heated rapidly
To Next Page
Loading...
