----------------------___e
••••
Do's
and
Don'ts
• Do not leave memory cards
in
places
subject to high humidity and high
temperature.
• Do not disassemble, bend, drop, or
subject memory cards to shocks and do
not expose them to water.
• Do not touch or expose the terminals to
dust or dirt.
• Check the direction before inserting the
memory card. Forcing a memory card into
the slot if it is not correctly oriented may
damage the memory card or the
camcorder.
• Do not attach any labels or stickers on
the memory card.
• When you erase image files or initialize
the memory card, only the file allocation
table is altered and the data itself is not
actually deleted. Take the necessary
precautions when you dispose
of
the
memory card, for example by physically
damaging it to prevent the leakage
of
private data.
Lithium
Button
Battery
WARNING!
• The battery
used
in
this device may
present a fire or chemical
burn
hazard if
mishandled.
Do
not recharge,
disassemble, heat above 100°C
(212
OF)
or incinerate the battery.
• Replace
the
battery with a CR2025
made
by
Panasonic, Hitachi Maxell,
Sony,
Sanyo, or with
Durace112025.
Use
of
other batteries may present a risk of fire
or explosion.
• Dispose of the
used
battery according
to
applicable recycling regulations.
• Do not pick up the battery using
tweezers or other metal tools as this will
cause a short circuit.
• Wipe the battery with a clean dry cloth
gE
to ensure proper contact.
L:.-.I
• Keep the battery out of the reach
of
children. If swallowed, seek medical
assistance immediately. The battery case
may break and the battery fluids may
cause internal damage.
• Do not disassemble, heat or immerse
the battery
in
water to avoid the risk
of
explosion.
Built-in
Rechargeable
Lithium
Battery
The camcorder has a built-in
rechargeable lithium battery to keep the
date/time and other settings. The built-in
lithium battery is recharged while you use
the camcorder, however, it will become
totally discharged if you do not use the
camcorder for about 3 months.
To
recharge
the
built-in
lithium
battery:
Connect the compact power adapter to
the camcorder and leave it connected for
24 hours with the power switch set to
@]D.
-
To Next Page
Loading...
