·
.....
---------------------------------
14
Lightning - For added protection
of
this
product during a lightning storm, or when it
is
left unattended and unused for long
periods
of
time, disconnect it from the wall
outlet and disconnect the antenna. This will
prevent damage to the product due to
lightning and power-line surges.
15
Overloading - Do not overload wall outlets
and extension cords as this can result
in
a
risk of fire or electric shock.
16 Objects and Liquid Entry - Never push
objects
of
any kind into this product
through openings as they may touch
dangerous voltage points or short out parts
that could result
in
a fire or electric shock.
Be
careful not to spill liquid
of
any kind onto
the product.
17 Servicing - Do not attempt to service this
product yourself as opening or removing
covers may expose you to dangerous
voltage or other hazards. Refer all
servicing to qualified service personnel.
18 Damage Requiring Service - Disconnect
this product from the wall outlet and all
power sources including battery, and refer
servicing to qualified service personnel
under the following conditions:
a.
When the power-supply cord
or
plug is
damaged.
b.
If any liquid has been spilled onto, or
objects have fallen into, the product.
c.
If the product has been exposed to rain
or water.
d.
If the product does not operate normally
even
if
you follow the operating
instructions. Adjust only those controls
that are covered by the operation
instructions. Improper adjustment of
other controls may result
in
damage and
will often require extensive work by a
qualified technician to restore the
product to its normal operation.
e.
If the product has been dropped or the
cabinet has been damaged.
f.
When the product exhibits a distinct
change
in
performance. This indicates a
need for service.
19 Replacement Parts - When replacement
parts are required, be sure the service
technician has used replacement parts that
are specified by Canon or that have the
same characteristics as the original part.
Unauthorized substitutions may result
in
fire, electric shock or other hazards.
20 Safety Check - Upon completion
of
any
service or repairs to this product, ask the
service technician to perform safety checks
to determine that the product
is
in
safe
operating order.
ANTENNA
LEAD
IN
WIRE
ANTENNA DISCHARGE
UNIT (NEC SECTION 810-20)
GROUNDING
CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250. PART
H)
EXAMPLE OF ANTENNA GROUNDING AS
PER NATIONAL ELECTRICAL CODE
----
NEC - NATIONAL
ELECTRICAL CODE
Fig. 1
When replacement
of
the power supply
is
required, please return it to the responsible nearest
Canon Service Center and please replace
it
with the same type number CA-570.
The Adapter can be used with a power supply between 100 and 240 V AC. For areas where
120 V
AC
power
is
not used, you will need a special plug adapter. Contact your nearest Canon
Service Center for further information.
IThis Class B digital apparatus complies with Canadian ICES-003.
To Next Page
Loading...
