----------------------------------
••••
Trouble?
Direct
Print
Related
Messages
--~
About
Canon
PIXMAISELPHY
DS
Printers:
If
the
printer's
error
indicator
flashes
or
an
error
message
appears
on
the
printer's
operation
panel,
refer
to
the
printer's
instruction
manual.
Message
Explanation
PAPER ERROR There is a problem with the paper. Wrong paper size is inserted or the ink
cannot be used with the selected paper.
Or,
if the paper output tray
is
closed, open it to print.
NO PAPER
Paper is not correctly inserted or there
is
no paper.
PAPER JAM
The paper jammed during printing. Select [STOP] to cancel printing. After
removing the paper, set some paper again and retry printing.
INK ERROR There is a problem with the ink.
NO INK The ink cartridge is not inserted or is out
of
ink.
LOW INK LEVEL The ink cartridge needs to be replaced soon. Select [CONTINUE] to restart
printing.
INK ABSORBER FULL Select [CONTINUE] to resume printing. Consult a Canon Service Center
(refer to the list included with the printer) to replace the ink absorber.
• FILE ERROR
You
attempted to print
an
image that was recorded with another
• CANNOT PRINT!
camcorder, with a different compression,
or
was edited on a computer.
COULD NOT PRINT X
You
attempted to use the print order settings to print X images that were
IMAGES recorded with another camcorder, with a different compression or were
edited on a computer.
SET
~ PRINT ORDER
No still image on the memory card has been marked with a
~ print order.
~
PRINT ORDER ERROR
You
attempted to set more than 998 still images
in
the print order.
CANNOT TRIM
You
attempted to trim
an
image that was recorded with another camcorder.
READJUST TRIMMING
You
changed the print style after you set the trimming settings.
PRINTER ERROR
Cancel printing. Turn off the printer and turn it back on. Check the printer
status. If the error still persists, refer to the printer's instruction manual and
contact the appropriate customer support center or service center.
PRINT ERROR Cancel printing, disconnect the USB cable and turn off the printer. After a
while, turn the printer back
on
and reconnect the USB cable. Check the
printer status.
When you are printing using the
~
~
button, check the print settings.
HARDWARE ERROR
Cancel printing. Turn off the printer and turn it back on. Check the printer
status. If the printer is equipped with a battery, it might be exhausted.
In
such case, turn off the printer, replace the battery and turn it back on.
COMMUNICATION The printer
is
experiencing a data transfer error. Cancel printing,
ERROR
disconnect the USB cable and turn off the printer. After a while, turn the
printer back on and reconnect the USB cable. When you are printing using
the
~
IN"
button, check the print settings.
Or,
you attempted to print from a memory card that contains a large
number
of
images. Reduce the number
of
images.
CHECK PRINT SETTINGS
The print setting cannot be used for printing with the
~
IN"
button.
-
To Next Page
Loading...
