Scan type Color Resolution File format
<Color Scan> Color 300 dpi JPEG (Exif)
<B&W Scan>
Black and white
*1
300 dpi
PDF (searchable
*2
)
<Custom 1> Color 300 dpi JPEG (Exif)
<Custom 2> Color 300 dpi JPEG (Exif)
*1
Documents are scanned in black and white only, with no intermediate shades of gray.
*2
A PDF format where characters on the document are scanned as text data and the text can be searched using a computer.
To change settings
● The settings in the table above are all factory default settings. You can change settings from MF Scan
Utility. For more information, click [Instructions] on MF Scan Utility.
● If you are a Mac OS user, see the User's Guide for ScanGear MF.
6
Press .
● Scanning starts.
● To cancel, press <Yes> .
You cannot scan while the ScanGear MF is displayed. Close the
screen before scanning.
7
If there are additional pages of documents to be scanned, place the next document
on the platen glass, and press
.
● Repeat this step until you nish scanning all of the pages.
● When there is only one page to be scanned, proceed to the next step.
8
Select <Finish Scanning>, and press .
● The save destination folder is displayed on the computer.
Using the Machine as a Scanner
124
To Next Page
Loading...
