Canon imageCLASS D570 - Printer Settings

Printer Settings
19Y4-05S
All the settings about the printer are listed with short descriptions. Default
settings are marked with a dagger ( ).
Asterisks (
*
)
● Settings marked with an asterisk (
*
) have different defaults depending on your country or region.
Priority of settings
● If a print setting is specied both from the printer driver and the operation panel of the machine, the
specication from the printer driver overrides that from the operation panel. The specication from the
operation panel becomes effective in some specic cases, such as when performing PCL printing and
printing from UNIX or other operating system that does not support printer drivers.
Action When Paper Size Mismatch(P. 307)
Mobile Print Halftones(P. 308)
Copies(P. 308)
2-Sided Printing(P. 308)
Default Paper(P. 308)
Print Quality(P. 309)
Layout(P. 310)
Timeout(P. 311)
PCL(P. 311)
Action When Paper Size Mismatch
Set whether printing goes ahead if a paper size other than the size loaded in the paper source is selected. You can also
set the machine not to go ahead with printing and instead display an alert message. When an Error Message
Appears(P. 339)
Force Output
Display Error
<Printer Settings> <Action When Paper Size Mismatch> Select <Force
Output> or <Display Error>
Setting Menu List
307