Turning the function On/Off
You can turn on/off the scan function available with AirPrint. The factory default setting is <On>.
<Network Settings> <TCP/IP Settings> <Network Link Scan
Settings> <Use Network Link Scan> Select <Off> or
<On>
Changing the TLS setting
You can specify whether to encrypt communications using TLS when performing scanning with AirPrint. The
factory default setting is [On].
● When the machine is connected to a Mac via USB, set [Use TLS] to [Off].
Log on to the Remote UI in System Manager Mode ( Starting Remote
UI(P. 266) ) [Settings/Registration] [Network Settings] [TCP/IP Settings] [Network Link
Scan Settings] [Edit] Clear or select the [Use TLS] check box [OK]
Displaying the Screen for AirPrint
You can display the screen for AirPrint, on which you can not only access the AirPrint Settings but also view
information about consumables, such as paper and toner cartridge. Further, you can congure security function
settings (
Enabling TLS Encrypted Communication for the Remote UI(P. 242) ).
1
Click [System Preferences] in the Dock on the desktop [Printers & Scanners].
2
Select this machine and click [Options & Supplies].
3
Click [Show Printer Webpage].
4
Log on to the Remote UI.
● To change AirPrint settings, log on in System Manager Mode.
➠ The screen for AirPrint is displayed.
Can Be Used Conveniently with a Mobile Device
144
To Next Page
Loading...
