Using WEP
1
Select <WEP>, and press .
2
Select an authentication method, and press .
<Open System>
Sets open system authentication, which is also called "open authentication."
<Shared Key>
Uses the WEP key as a password.
When <Open System> is selected
When connecting to a wireless LAN, the machine experiences an authentication error if the shared key
authentication is set on the wireless router. If this happens, the machine automatically changes the
setting to <Shared Key> and retries the connection.
3
Select <Edit WEP Key>, and press .
4
Select the WEP key (1 to 4) you want to edit, and press .
● Up to four WEP keys can be registered.
5
Enter the network key that you have written down.
● Enter the network key using the numeric keys, and select <Apply>, and press . Entering
Text(P. 31)
6
Select <Select WEP Key>, and press .
Network
174
To Next Page
Loading...
