[User Name]
Enter up to 24 alphanumeric characters for the user name.
[Change Password]
To set or change the password, select the check box and enter up to 24 alphanumeric characters for the
new password both in the [Password] and [Conrm] text boxes.
6
Click [OK].
7
Restart the machine.
● Turn OFF the machine, wait for at least 10 seconds, and turn it back ON.
Using the operation panel
● You can also enable or disable IEEE 802.1X authentication from <Menu>.
IEEE 802.1X Settings(P. 289)
LINKS
Conguring Settings for Key Pairs and Digital Certicates(P. 250)
Security
249
To Next Page
Loading...
