When set to <On>.
The following may occur.
● Denition may be affected
● Toner appears in non-print areas when using a new toner cartridge
● Toner cartridge may be used up more quickly
Special Printing Mode K
If toner does not adhere adequately and printouts are faded, select <On>.
Off
On
<Adjustment/Maintenance>
<Special Processing>
<Special Printing
Mode K> <On>
When set to <On>
Print speed is slower.
Clean Fixing Assembly
Clean the xing assembly after a toner cartridge is replaced or if black streaks appear on printouts. Fixing
Assembly(P. 372)
Setting Menu List
322
To Next Page
Loading...
