4
Remove the replacement toner cartridge from the protective bag.
5
Shake the toner cartridge 5 or 6 times as shown below to evenly distribute the toner
inside the cartridge, and then place it on a at surface.
6
Pull the sealing tape straight out.
● The full length of the sealing tape is approximately 19 3/4" (50 cm).
When pulling out the sealing tape
If the sealing tape remains inside the toner cartridge, the quality of printouts may deteriorate.
● Do not pull out the sealing tape at an angle or sideways. If the tape breaks, you may not be able to pull it
out completely.
Maintenance
380
To Next Page
Loading...
