Note
•
Watermarks are supported in Windows.
•
In addition to the provided watermarks, you can create up to 50 original watermarks.
For detailed instructions on printing with watermarks, refer to the following topics:
•
Printing with Watermarks—COPY, FILE COPY, and so on (Windows) ➔P.138
Printing with Watermarks—COPY, FILE COPY, and so on (Windows)
Printing with Watermarks—COPY, FILE COPY, and so on (Windows)
This topic describes how to print with watermarks, based on the following example of printing with a FILE COPY water-
mark.
•
Document: Any type
•
Page size: A2 (420.0×594.0 mm [16.5 × 23.4 in])
•
Paper: Roll paper
•
Paper type: Plain Paper
•
Roll paper width: A2/A3 roll (420.0 mm [16.5 in[)
1
Choose Print in the application menu.
2
Select the printer in the dialog box, and then display the printer driver dialog box. (See "Accessing the Printer
Driver Dialog Box from Applications .") âž” P.157
3
Make sure the Main sheet is displayed.
4
In the A Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
5
Make your selection in the E Print Target list.
Note
•
You can check the settings values selected in the E Print Target list by clicking G View Settings.
Printing with Watermarks—COPY, FILE COPY, and so on (Windows)
iPF6400SE
User's Guide
Enhanced Printing Options Other useful settings
138
To Next Page
Loading...
Need help?
General