Handling rolls
Handling rolls
Loading Rolls on the Roll Holder ........................................................................................................................... 363
Loading Rolls in the Printer ................................................................................................................................... 365
Changing the Type of Paper ................................................................................................................................. 368
Specifying the Paper Length ................................................................................................................................. 369
Removing the Roll from the Printer ....................................................................................................................... 370
Removing Rolls From the Roll Holder .................................................................................................................... 372
âž” Clearing Jammed Roll Paper .......................................................................................................................... 611
âž” Clearing Jammed Paper (Paper Feed Slot) ..................................................................................................... 616
Feeding Roll Paper Manually ................................................................................................................................. 373
Keeping Track of the Amount of Roll Paper Left .................................................................................................... 373
Specifying the Ink Drying Time for Rolls ................................................................................................................ 374
Specifying the Cutting Method for Rolls ................................................................................................................ 376
Cutting the Leading Edge of Roll Paper Automatically .......................................................................................... 382
Reducing Dust from Cutting Rolls ......................................................................................................................... 384
Roll Holder Set ..................................................................................................................................................... 384
Removing the Roll Feed Unit ................................................................................................................................ 385
Installing the Roll Feed Unit ................................................................................................................................... 386
Loading Rolls on the Roll Holder
Loading Rolls on the Roll Holder
When printing on rolls, attach the Roll Holder to the roll.
Rolls have a two- or three-inch paper core. Use the correct Holder Stopper and attachment for the paper core.
For borderless printing on A1 (594 mm) or A2 (420 mm) rolls, attach the included Spacer for Borderless Printing to the
Roll Holder.
Using Rolls with a 2-inch Paper Core Using Rolls with a 3-inch Paper Core
Holder Stopper Roll Holder Side Holder Stopper Roll Holder Side
For 2-inch paper cores No Attachment Needed For 3-inch paper cores 3-Inch Paper Core Attachment
Caution
•
Set the roll on a table or other flat surface so that it does not roll or fall. Rolls are heavy, and dropping a roll may cause
injury.
iPF6400SE
Loading Rolls on the Roll Holder
User's Guide
Handling and Use of Paper Handling rolls
363
To Next Page
Loading...
Need help?
General