•
Object Adjustment dialog box: Color âž” P.283
•
Matching pane âž” P.279
•
Color Settings Pane: Monochrome âž” P.283
•
Object Adjustment dialog box: Monochrome âž” P.284
•
Page Setup Pane
➔P.285
You can specify the page size of the original, borderless printing, enlargement or reduction, the orientation, the
paper size and source, and automatic cutting.
With the imagePROGRAF Free Layout feature, you can arrange originals from various source applications on a single
page before printing. For details, see "Free Layout."
➔P.310
With the imagePROGRAF Preview feature, you can check the layout before printing and adjust layout or size settings
while viewing a preview screen. For details, see "Preview." ➔P.287
With the Color imageRUNNER Enlargement Copy feature, you can automatically enlarge and print scanned originals
from a Color imageRUNNER. For details, see "Color imageRUNNER Enlargement Copy." âž” P.335
Specifying Paper in the Printer Driver
Specifying Paper in the Printer Driver
If you have replaced the paper, you must complete the following settings in the printer driver.
1
This sets the B Format for and C Paper Size.
Note
•
The configuration method varies depending on the OS
and application software you are using.
If Page Setup is displayed in the application menu, the
settings are configured by opening the Page Attributes
dialog box from Page Setup.
If it is not displayed, the settings are configured in the upper
part of the printer driver displayed when you select Print
from the application software menu.
2
Select the printer in the
A Printer list.
3
Choose the original size in the F Paper Size list.
4
If you configured the settings using the Page Attributes dialog box, click F OK to close the dialog box, and
then select Print from the application software menu.
iPF6400SE
Specifying Paper in the Printer Driver
User's Guide
Mac OS Software Printer Driver
269
To Next Page
Loading...
Need help?
General