Canon imagePROGRAF iPF6400SE - Paper Settings Panel

Paper Settings Panel
Paper Settings Panel
This panel appears when you select Paper Settings in the dialog area.
•
Media Type
This allows you to select the media type.
Note
•
Always select media type that is actually set in the printer. When the media you chose is different from the media
set in the printer, you may not receive the desired print results.
•
Easy Settings / Advanced Settings
Two modes are available to provide the optimum print settings for jobs.
The settings available on each mode are as follows.
• Easy Settings ➔ P.315
• Advanced Settings ➔ P.317
• Paper Source
You can select the paper source.
The following settings are available for paper source.
Setting Details
Roll Paper Select to print on roll paper.
Manual Select for manual paper feed printing.
Manual (3mm margins) Select for manual paper feed printing when you want to minimize the margin at the far end
edge of paper.
Note
•
When you select Manual (3mm margins) for Paper Source, the far end edge of printed image may become
defective depending on the paper used. If this happens, select another paper source.
Paper Settings Panel iPF6400SE
User's Guide
Mac OS Software Free Layout
314