•
Roll Holder (for 2- and 3-inch paper cores)
•
Attachments
Using Rolls with a 2-inch Paper Core Using Rolls with a 3-inch Paper Core
Holder Stopper (for 2-inch paper cores) Holder Stopper (for 3-inch paper cores) 3-Inch Paper Core Attachment
•
Borderless Printing on A1 or A2 Rolls
Spacer for Borderless Printing
Removing the Roll Feed Unit
Removing the Roll Feed Unit
Important
•
Always turn off the printer before removing the Roll Feed Unit. The printer may be damaged if you do not turn it off
first.
1
Remove the roll from the Roll Feed Unit. (See "Removing the Roll from the Printer.") âž” P.370
2
Use a coin or screwdriver to loosen the screws (a) on both
sides of the back of the Roll Feed Unit, and remove the
screws.
iPF6400SE
Removing the Roll Feed Unit
User's Guide
Handling and Use of Paper Handling rolls
385
To Next Page
Loading...
Need help?
General