Canon imagePROGRAF iPF6400SE - Installing the Roll Feed Unit

3
Holding the Carrying Handles (a) of the Roll Feed Unit,
remove the Roll Feed Unit from the printer.
Installing the Roll Feed Unit
Installing the Roll Feed Unit
Important
•
Always turn off the printer before attaching the Roll Feed Unit. The printer may be damaged if you do not turn it off
first.
1
Holding the Roll Feed Unit by the Carrying Handles (a),
insert the two pins of the Roll Feed Unit (b) into the
each hole on the back of the printer (c).
Installing the Roll Feed Unit
iPF6400SE
User's Guide
Handling and Use of Paper Handling rolls
386