Messages regarding printing or adjustment
Messages regarding printing or adjustment
Cannot print as specified. ..................................................................................................................................... 652
Cannot adjust printhead. ...................................................................................................................................... 654
Before borderless printing, move the blue platen switch. ...................................................................................... 652
Borderless printng not possible. ........................................................................................................................... 648
Blue platen switch is dirty. .................................................................................................................................... 652
Move the blue platen switch No.xx to the right. (xx represents a number) ............................................................. 652
Cannot adjust paper feed. .................................................................................................................................... 652
Check printed document. ..................................................................................................................................... 653
Cannot print as specified.
Cannot print as specified.
"Replace paper with A4/LTR (vertical) or larger"
Cause Corrective Action
The loaded paper is too small.
(When you have attempted to print a test print
sheet or other printer status information.)
Replace the paper with paper of A4/Letter (vertical) size or larger as follows.
1.
Press ▲ or ▼ to select Change Paper, press the OK button, and remove the pa-
per.
(See "Removing Sheets.") ➔P.390
2.
Switch to paper A4/Letter (vertical) or larger.
(See "Loading and Printing on Sheets.") ➔P.21
The printer will resume printing.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
Before borderless printing, move the blue platen switch.
Before borderless printing, move the blue platen switch.
Cause Corrective Action
The blue Switch on the platen was set to the side opposite ●
when a borderless print job was received.
Before borderless printing, set the blue Switch on the platen to the ● side.
(See "Setting the Blue Switch on the Platen.") ➔P.626
Blue platen switch is dirty.
Blue platen switch is dirty.
Cause Corrective Action
The blue Switch on the platen is dirty. Open the Top Cover and clean the blue Switch on the platen.
(See "Cleaning Inside the Top Cover.") ➔ P.592
Move the blue platen switch No.xx to the right. (xx represents a number)
Move the blue platen switch No.xx to the right. (xx represents a number)
Cause Corrective Action
The printer has detected that the blue Switch on the platen needed in
maintenance during printing is set away from the ● mark.
Set blue platen Switch of the indicated number toward the ● side.
(See "Setting the Blue Switch on the Platen.") ➔P.626
Cannot adjust paper feed.
Cannot adjust paper feed.
Cause Corrective Action
The Printhead nozzles are clogged. Execute Adj. Quality again, as follows.
1.
Press the OK button to clear the error.
2.
Print a test pattern to check the nozzles.
(See "Checking for Nozzle Clogging.") ➔P.576
Cannot print as specified.
iPF6400SE
User's Guide
Error Message Messages regarding printing or adjustment
652
To Next Page
Loading...
Need help?
General