Printheads
Printheads
Printhead .............................................................................................................................................................. 576
Checking for Nozzle Clogging ............................................................................................................................... 576
Cleaning the Printhead ......................................................................................................................................... 577
Replacing the Printhead ....................................................................................................................................... 578
Printhead
Printhead
When purchasing, check the Model number.
Shape Model number
PF-05
Note
•
For instructions on replacing the Printhead, see "Replacing the Printhead." ➔ P.578
Checking for Nozzle Clogging
Checking for Nozzle Clogging
If printing is faint or affected by banding in different colors, make sure the Printhead nozzles are clear by printing a test
pattern to check the nozzles.
Note
•
By default, nozzles are checked at fixed intervals.
Configure the settings on the Control Panel menu in Nozzle Check.
(See "Menu Settings.") ➔P.474
Paper to Prepare
When Using Rolls An unused roll at least 254.0 mm (10.00 in) wide
When Using Sheets One sheet of unused paper of at least A4/Letter size
1
Load paper.
•
Loading Rolls on the Roll Holder ➔ P.363
•
Loading Rolls in the Printer ➔ P.365
•
Loading Sheets in the Feed Slot ➔ P.388
2
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to se-
lect the Settings/Adj. tab ( ).
Printhead
iPF6400SE
User's Guide
Maintenance and Consumables Printheads
576
To Next Page
Loading...
