Canon imagePROGRAF iPF6400SE - Resizing Originals by Entering a Scaling Value

9
Access the Page Setup pane.
10
Select and click a roll paper in the A Paper Source list.
11 Select the paper width of the roll loaded in the printer for B Roll Width. In this case, 16 in. (406.4mm) is selec-
ted.
12
Make sure the C Page Size setting matches the origi-
nal size as selected in C Paper Size in the Page At-
tributes dialog box—in this case, ISO A4.
13 Select the D Enlarged/Reduced Printing check box.
14 Click F Fit Roll Paper Width.
15
Confirm the print settings, and then click M Print to start printing.
Note
•
For tips on confirming print settings, see "Confirming Print Settings ." ➔P.271
Resizing Originals by Entering a Scaling Value
Resizing Originals by Entering a Scaling Value
You can freely adjust the size of originals by enlarging or reducing them as desired.
• Enlarged/Reduced Printing
Enlarge or reduce the original in the printer driver, as desired.
Resizing Originals by Entering a Scaling Value iPF6400SE
User's Guide
Enhanced Printing Options Printing enlargements or reductions
60