Other Messages
Other Messages
GARO Wxxxx (x represents a number) .................................................................................................................. 657
ERROR Exxx-xxxx (x represents a letter or number) ..............................................................................................657
Hardware error. xxxxxxxx-xxxx (x represents a letter or number) ........................................................................... 657
Prepare for parts replacement. ............................................................................................................................. 658
Parts replacement time has passed. ..................................................................................................................... 658
Unknown file. ........................................................................................................................................................ 658
Multi-sensor error ................................................................................................................................................. 658
Roll feed unit error. ............................................................................................................................................... 646
No Roll Unit. ......................................................................................................................................................... 646
GARO Wxxxx (x represents a number)
GARO Wxxxx (x represents a number)
Cause Corrective Action
There is a problem with the print job. Try printing again, using the correct printer driver.
It is also possible to continue printing in this state.
However, you may not be able to obtain the desired printing results.
ERROR Exxx-xxxx (x represents a letter or number)
ERROR Exxx-xxxx (x represents a letter or number)
Cause Corrective Action
An error requiring service may have occurred. Write down the error code and message, turn off the printer, and contact your Canon
dealer for assistance.
Hardware error. xxxxxxxx-xxxx (x represents a letter or number)
Hardware error. xxxxxxxx-xxxx (x represents a letter or number)
Cause Corrective Action
The last portion of roll paper was used during a print job. The paper
was not advanced because the trailing edge is taped to the roll.
Turn off the printer and remove the roll from the printer before re-
storing power.
Fastening tape or the Belt Stopper has not been removed inside the
Top Cover.
Turn off the printer, open the Top Cover and remove the tape or
the Belt Stopper before restoring power.
An error requiring service may have occurred. Turn off the printer and wait at least three seconds before restor-
ing the power.
If the message is displayed again, write down the error code and
message, turn off the printer, and contact your Canon dealer for
assistance.
iPF6400SE
GARO Wxxxx (x represents a number)
User's Guide
Error Message Other Messages
657
To Next Page
Loading...
Need help?
General