NAME
Utilization status of the cutter, media, and other items (indicating
how much they have been used).
TTL
ROLL
CUTSHEET
AFTER INSTALLATION
DUTY Counters for maintenance purposes. Needed when service is
requested.
UNIT:m2
UNIT:sq.f
UNIT:A4 Sheet
UNIT:Letter Sheet
Printing Interface Setting Reports
Printing Interface Setting Reports
You can print an Interface Print report indicating the current interface settings values of the printer.
Printing Interface Print reports
1
Load the paper.
If using sheets, load paper A4/Letter-sized, you will need at least three sheets.
2
On the Tab Selection screen of the Control Panel, press â—€ or â–¶ to se-
lect the Settings/Adj. tab ( ).
Note
•
If the Tab Selection screen is not displayed, press the Menu button.
3
Press the OK button.
The Set./Adj. Menu is displayed.
4
Press â–² or â–¼ to select Test Print, and then press the OK button.
5
Press â–² or â–¼ to select Interface Print, and then press the OK button.
Confirming Interface Print information
The following information is included in the Interface Print report.
Canon imagePROGRAF iPFxxxx Interface Print Printer model
Firm Firmware Version
Boot Boot ROM Version
MIT(DBF) MIT Database Format Version
MIT(DB) MIT Database Version
S/N Printer serial number
iPF6400SE
Printing Interface Setting Reports
User's Guide
Control Panel Printer Menu
485