Canon imagePROGRAF iPF6400SE - Paper Not Aligned with Right Guide; Cannot Detect Papr; Cannot Feed Paper

Cause Corrective Action
If paper is loaded from the Top Paper Feed
Slot, follow the procedure below.
Remove the paper.
Next, use the procedure in Display Screen in
Control Panel.
(See "Loading Sheets in the Feed
Slot.") ➔P.388
If this error recurs after you reload the roll,
remove the Roll Holder from the printer, push
the roll firmly in until it touches the Roll Hold-
er flange, and reload the Roll Holder in the
printer.
(See "Loading Rolls on the Roll Hold-
er.") ➔P.363
Important
• To disable this message (if it is displayed repeatedly despite reloading paper, for example), choose Off or Loose in
the Skew Check Lv. setting of the printer menu. However, this may cause jams and printing problems because paper
may be askew when printed. Also, the Platen may become soiled, which may soil the back of the next document
when it is printed.
Paper not aligned with right guide.
Paper not aligned with right guide.
Cause Corrective Action
Skew Check Lv. on the Control Panel menu is set to something other than Off
and the paper is not aligned with the guide on the right during loading.
Reload the paper as follows.
1.
Press the OK button to clear the error.
2. Reload the paper.
(See "Loading Rolls in the Printer.") ➔P.365
(See "Loading Sheets in the Feed Slot.") ➔P.388
Cannot detect papr
Cannot detect papr
Cause Corrective Action
The printer could not detect the paper. Reload the paper as follows.
1.
Remove the paper and press the OK button.
2. Reload the paper.
(See "Loading Sheets in the Feed Slot.") ➔P.388
(See "Loading Rolls in the Printer.") ➔P.365
Cannot feed paper.
Cannot feed paper.
Cause Corrective Action
Paper could not be advanced correctly during feeding.
1.
Press the OK button.
2. Remove the paper.
(See "Clearing Jammed Roll Paper.") ➔P.611
(See "Clearing a Jammed Sheet, Fed Manually.") ➔P.614
3. Load the paper.
(See "Loading Rolls in the Printer.") ➔P.365
(See "Loading Sheets in the Feed Slot.") ➔P.388
Paper could not be advanced correctly during ejection.
1. Press the OK button.
2. Remove the paper.
(See "Clearing Jammed Roll Paper.") ➔P.611
iPF6400SE Paper not aligned with right guide.
User's Guide
Error Message Messages regarding paper
647