Specifying menu items
Menu items can be set as follows.
1
Press ▲ or ▼ to select the desired setting, and then press the OK but-
ton.
After two seconds, the display reverts to the upper level menu.
Note
•
If a confirmation message is displayed regarding the setting you entered, press the OK button. The setting is
applied, and the printer is now in Standby.
Specifying numerical values
Follow these steps to enter numbers. In this example, network settings items are entered.
1
Press the ◀ or ▶ button to move to the next field for input.
2
Press the ▲ or ▼ button to enter the value.
Note
•
Hold down ▲ or ▼ to increase or decrease the value continuously.
3
Repeat steps 1 and 2 to complete the settings, and then press the OK button.
Note
•
If a confirmation message is displayed regarding the setting you entered, press the OK button. The setting is
applied, and the printer is now in Standby.
Executing menu commands
Menu commands can be executed as follows.
1
Press ▲ or ▼ to select the action to execute, and then press the OK button.
The menu command is now executed.
Menu Operations
iPF6400SE
User's Guide
Control Panel Printer Menu
468
To Next Page
Loading...
