3
Click the Add button. To change the unit cost of a media type that has already been configured, click the Over-
write button.
4
Click the OK button.
Important
•
The settings are not applied until you click the OK button.
Specifying Price by Roll Paper
1
Select the media type in Media Type.
2
Click the Roll Paper Width Settings button to display the Roll
Paper Width Settings dialog box.
3
Enter the Roll Paper Width and Length of the paper, as well as the Price for the configured length.
4
Click the Add button to return to the Paper sheet.
5
To change the unit cost of a media type that has already been configured, click the Overwrite button.
6
Click the OK button.
Important
•
If you do not set the standard prices, you cannot set the price for each roll paper.
•
If the Roll Paper Width is set to the same value as the Width of the paper configured in the standard prices, the cost
is calculated using the price configured in the Roll Paper Width Settings dialog box.
•
The settings are not applied until you click the OK button.
iPF6400SE
Setting the Unit Cost for Paper
User's Guide
Print Job Management Accounting (Windows)
543
To Next Page
Loading...
Need help?
General