11
Close the Top Cover.
Ink now fills the system. It takes about nine minutes to com-
plete.
Important
•
While ink is being filled, definitely do not remove the Ink Tank or Maintenance Cartridge. Ink may leak out.
Note
•
The procedure is now finished if you have set Rep.P.head Print to Off in the Control Panel menu.
In this case, execute the Initial adjustmt of Head Posi. Adj. from the Control Panel menu.
(See "Adjustment When Installing the Printhead.") ➔P.555
12
Follow the instructions on the Display Screen to advance the paper.
After the paper is advanced the Initial adjustmt of Head Posi. Adj. will be executed automatically.
Replacing the Printhead
iPF6400SE
User's Guide
Maintenance and Consumables Printheads
584
To Next Page
Loading...
