5
Refer to the following table to confirm the number on the Platen
(a) that corresponds to the size of paper for printing.
Number Dimensions Paper Size
2 254 mm (10 in) or 257 mm 10"x12" / 10"x15" / 8"x10" / JIS B4
3 355 mm (14 in) 14"x17" / Legal (8.5"x14")
4 406 mm (16 in), 420 mm, or 432 mm (17
in)
16"x20" / 12"x16" / ISO A2 / ISO A3 / ISO A2+ / 17"x22"(ANSI C) / 14"x17"
5 515 mm (20 in) JIS B2 / 20"x30" / JIS B3
6 610 mm (24 in) ISO A1 / ISO A2 / 24"x36" (ARCH D) / 20"x24" / 18"x24" (ARCH C)
6
Using the back of the Cleaning Brush, move the Switch to the side opposite ●, corresponding to the size of the
paper for printing.
In this case, note that you will move the switch in the opposite direction from the direction in step 4.
Note
•
The Switch only moves number 1 and the number that match-
es the paper size. Set all of the switches where the number
does not match the paper size in switches number 2 and high-
er to the ● side.
7
Close the Top Cover.
Setting the Blue Switch on the Platen
iPF6400SE
User's Guide
Troubleshooting Problems with the printing quality
628
To Next Page
Loading...
Need help?
General