1
This sets the B Format for and C Paper Size.
Note
•
The configuration method varies depending on the OS
and application software you are using.
If Page Setup is displayed in the application menu, the
settings are configured by opening the Page Attributes
dialog box from Page Setup.
If it is not displayed, the settings are configured in the upper
part of the printer driver displayed when you select Print
from the application software menu.
2
Select the printer in the A Printer list.
3
In F Paper Size, click the size of the original. In this case, click ISO A4 - Oversize.
4
If you configured the settings using the Page Attributes dialog box, click F OK to close the dialog box, and
then select Print from the application software menu.
5
Access the Main pane.
6
In the A Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
7
Make your selection in the E Print Target list.
8
Make your selection in the F Print Quality list.
iPF6400SE
Printing at Full Size (Mac OS)
User's Guide
Enhanced Printing Options Printing at full size
69
To Next Page
Loading...
Need help?
General