8
Select the C Enlarged/Reduced Printing check box.
Note
•
If the C Enlarged/Reduced Printing check box is not
displayed on the Page Setup sheet, clear the B Bor-
derless Printing check box.
9
Select and click a roll paper in the L Paper Source list.
10
After you click E Fit Roll Paper Width, the Information dialog box is displayed.
11
Select the width of the loaded roll in the Roll Paper Width list. In this case, click 16-in. Roll (406.4mm), and
then click OK.
12
Confirm the print settings and print as desired.
Note
•
For tips on confirming print settings, see "Confirming Print Settings ." ➔P.154
If printing is unsuccessful, you may be able to print after completing the following setting.
1
On the Layout sheet, click J Special Settings to dis-
play the Special Settings dialog box.
Printing Vertical or Horizontal Banners (Large-Format Printing; Windows)
iPF6400SE
User's Guide
Enhanced Printing Options Printing banners or at other non-standard sizes
92
To Next Page
Loading...
Need help?
General