Canon imagePROGRAF IPF700 - Driving Unit; Waste Ink Box

Chapter 4
4-11
4.3.5 Waste ink box
0013-8085
a. Removing the waste ink box
To remove the waste ink box, remove waste ink tray [1] from the back by unscrewing two screws[4]. Then,
unscrew four screws[2] to remove waste ink box [3].
F-4-15
4.3.6 Driving unit
0012-6365
a. Timing belt (for driving the feed roller)
To assemble the timing belt for driving the feed roller, loosen the tensioner setscrew and establish the tension
of the timing belt by adjusting the spring pressure. When the timing belt is assembled back in position, tighten
the tension with the setscrew.
F-4-16
[
1]
[
3]
[2]
[4]
[3]
[2]
[1]
[4]