Chapter 4
4-21
4.3.11 Ink tank unit
0012-6377
a. Removing the ink tank unit
(1) Drain the printer of inks. See Disassembly/Reassembly > Tips on Disassembly/Reassembly > Ink Drain.
(2) Remove the joint between the ink tube unit and the ink tank unit.
(3) Unscrew four ink tank unit screws and remove five connectors, and then remove the ink tank unit.
F-4-30
b. Removing the valve motor unit
(1)Unscrew four screws and remove one screw, and then remove the valve motor unit.
F-4-31
[1]
[1]
To Next Page
Loading...
