Chapter 1
1-10
c. [IEEE1394] (option)
(1) Interface Type
IEEE1394-1995, P1394a (Version 2.0)-compliant interface
(2) Method of data transfer
Asynchronous transfer
(3) Signal levels
Input:
Differential input voltage: +173mV - +260mV during S100 arbitration
+142mV - +260mV, receiving data
+171mV - +262mV during S200 arbitration
+132mV - +260mV, receiving data
+168mV - +265mV during S400 arbitration
+118mV - +260mV, receiving data
Output :
Differential output voltage: +172mV - +265mV
(4) Interface cable
Twisted-pair shielded cable, 4.5 mm or shorter.
Compliant with the IEEE1394-1995 or (Version 2.0) standard
(5) Interface connector
Printer side: IEEE1394-compliant, 6-pin connector (socket)
Cable side: IEEE1394-compliant, 6-pin connector (plug)
Cable side: Compliant with the ANSI/EIA/TIA-568A or ANSI/EIA/TIA-568B standard, Type RJ-45.
1.5 Names and Functions of Components
1.5.1 Printer front panel
0012-6202
F-1-9
[1] Top cover
Open this cover to mount the printhead, load paper and clear jams inside the printer.
[2] Eject guide
Supports ejected paper to keep it from floating up.
[3] Maintenance cartridge
Blots excess inks.
[4] Maintenance cartridge cover
Open this cover to replace the maintenance cartridge.
[5] Operation panel
Operate the printer or check its status from this panel.
[6] Ink tanks cover
Open this cover to replace ink tanks.
[1]
[5]
[6]
[2]
[3]
[4]
To Next Page
Loading...
