Canon imagePROGRAF IPF700 Service Manual

Chapter 6
6-40
6.3 Version Up
6.3.1 Firmware Update Tool
0013-6639
Use of the following tools allows you to update the firmware of the system controller incorporated in the printer.
- GARO Firmware Update Tool
- L Printer Service Tool
1. GARO Firmware Update Tool
GARO Firmware Update Tool is the same as that for user.
Procedure
1) Start CARO Firmware Update Tool.
2) Place the printer in the online mode.
3) Transfer the firmware data to the printer according to the instructions shown on the display.
4) The data shown on the LCD on the operation panel changes and the firmware is updated automatically.
5) When firmware update is completed, the printer will start again.
File transfer route:
USB, IEEE1394, network
2. L Printer Service Tool
Procedure
1) Start L Printer Service Tool.
2) Place the printer in the online mode.
3) Specify the firmware file(jdl) and then transfer it.
4) The data shown on the LCD on the operation panel changes and the firmware is updated automatically.
5) When firmware update is completed, the printer will start again.
File transfer route:
USB, IEEE1394, network (directly connected using a cross cable)

Canon imagePROGRAF IPF700 Specifications

General

Brand	Canon
Model	imagePROGRAF IPF700
Category	Printer
Language	English