Chapter 6
6-20
T-6-2
8 VM IN Power supply (+32V)
9 VMGND - GND
10 VMGND - GND
11 VM_ENB OUT VM enable signal
12 AFCONT OUT Normal/power saving switch signal
J2501
Pin
Number
Signal name IN/OUT Function
A1 N.C - N.C
A2 N.C(GND) - N.C
A3 N.C(LIFT_CAM) - N.C
A4 SNS3V OUT Power supply (+3.3V)
A5 GND - GND
A6 /CRHP IN Lift cam sensor output signal
A7 LIFTM_VM OUT Power supply (+32V)
A8 LIFTM0_A OUT Lift motor Drive signal A
A9 LIFTM2_AX_N0 OUT Lift motor Drive signal AX
A10 LIFTM1_B OUT Lift motor Drive signal B
A11 LIFTM3_BX_N1 OUT Lift motor Drive signal BX
A12 /ATUKAIJYO IN Pressure release switch output signal
A13 GND - GND
B1 PUMPM1_AM OUT Pump motor Drive signal AM
B2 PUMPM1_AP OUT Pump motor Drive signal AP
B3 GND - GND
B4 PUMPR_ENCA IN Pump encoder output signal A
B5 SNS5V OUT Power supply (+5V)
B6 PUMPR_ENCB IN Pump encoder output signal B
B7 SNS3V OUT Power supply (+3.3V)
B8 GND - GND
B9 /CONTROL_CAM_R IN Pump cam sensor output signal
B10 GND - GND
B11 /MEDIA_R IN Media sensor output signal
B12 SNS5V OUT Power supply (+5V)
B13 N.C - N.C
J1801
Pin
Number
Signal name IN/OUT Function
To Next Page
Loading...
