Chapter 6
6-29
T-6-18
3 VMGND - GND
4 VMGND - GND
5 VM IN Power supply (+32V)
6 VM IN Power supply (+32V)
7 VM IN Power supply (+32V)
8 VM IN Power supply (+32V)
9 VM IN Power supply (+32V)
10 VM IN Power supply (+32V)
11 VM IN Power supply (+32V)
12 VM IN Power supply (+32V)
13 SNS5V IN Power supply (+5V)
14 SNS5V IN Power supply (+5V)
15 GND - GND
16 +3.3V IN Power supply (+3.3V)
17 +3.3V IN Power supply (+3.3V)
18 GND - GND
19 VH_MONI2 OUT VH control signal 2
20 VH_ENB IN VH Power supply ON/OFF control signal
21 VH_MONI1 OUT VH control signal 1
22 VMGND - GND
23 VMGND - GND
24 VMGND - GND
25 VMGND - GND
J102
Pin
Number
Signal name IN/OUT Function
1 /ENCODER_A OUT Carriage encoder output signal A
2 /ENCODER_B OUT Carriage encoder output signal B
3 GND - GND
4 /CR_COVER OUT Carriage cover sensor output signal
5 /OUT_ENB IN Head data enable signal
6 H-DASH_LICC2_B IN Head analogue switch A/D trigger signal
7 GND - GND
8 H1-D-DATA-7-OD_B IN Odd head data signal 7(D)
9 GND - GND
10 H1-E-HE-8_B IN Head heat enable signal 8(E)
11 GND - GND
J101
Pin
Number
Signal name IN/OUT Function
To Next Page
Loading...
