Please execute common calibration.
Please execute common calibration.
Cause Corrective Action
There is not even one Common calibration execution result.
Note that this is displayed when all of the following are satisfied.
•
If Set Exec. Guide is On in the Control Panel menu.
•
If the printer is loaded with a type of paper on which color calibration cannot be executed.
Execute Common calibration.
(See "Color Calibration Using the Printer Sen-
sor.")
→
P.830
Set Set Exec. Guide to Off on the Control Pan-
el menu.
(See "Menu Structure.")
→
P.667
Please commn calibrt using above paper.
Please commn calibrt using above paper.
Cause Corrective Action
It is now recommended that you execute Common calibration.
Note that this is displayed when Set Exec. Guide in the Control Panel menu is set to On and any of the following is
true.
•
If the printer is loaded with a type of paper on which color calibration cannot be executed and the predefined con-
ditions since executing the Common calibration the last time have been reached.
•
Although a media type that color calibration can be executed on is loaded in the printer, there is no record or
performing color calibration on that media, and the designated criteria from executing Common calibration the last
time have been reached.
Execute Common cali-
bration.
(See "Color Calibration
Using the Printer Sen-
sor.")
→
P.830
Set Set Exec. Guide
to Off on the Control
Panel menu.
(See "Menu Struc-
ture.")
→
P.667
Please calibrate using above paper.
Please calibrate using above paper.
Cause Corrective Action
It is now recommended that you execute Unique calibration.
Note that this is displayed when Set Exec. Guide in the Control Panel menu is set to On and any of the following is
true.
•
If the printer is loaded with a type of paper on which color calibration can be executed, but there is no record of
having executed color calibration on that paper or a record of having executed Common calibration other any other
type of paper.
•
If the printer is loaded with a type of paper on which color calibration can be executed, there is a record of having
executed color calibration on that paper, and the predefined conditions since executing the color calibration the last
time have been reached.
Execute Unique cali-
bration.
(See "Color Calibra-
tion Using the Printer
Sensor.")
→
P.830
Set Set Exec. Guide
to Off on the Control
Panel menu.
(See "Menu Struc-
ture.")
→
P.667
Borderless printng not possible. Paper stretched or shrank.
Borderless printng not possible. Paper stretched or shrank.
Cause Corrective Action
The loaded roll has expanded or contracted due to environmental conditions,
making it wider or narrower than the supported width for borderless printing.
Press the OK button to stop printing.
Use each type of paper only where the recommended environ-
mental conditions are met. For details on environmental condi-
tions for various paper, see the Paper Reference Guide.
(See "Paper Reference Guide.")
Before borderless printing, move the blue platen switch.
Before borderless printing, move the blue platen switch.
Cause Corrective Action
The blue Switch on the platen was set to the side opposite ● when
a borderless print job was received.
Before borderless printing, set the blue Switch on the platen to the ● side.
(See "Setting the Blue Switch on the Platen.")
→
P.974
iPF8400
Please execute common calibration.
User's Guide
Error Message Messages regarding printing or adjustment
1005
To Next Page
Loading...
Need help?
General
