Canon imagePROGRAF iPF8400 User Manual

Network Environment
Network Environment
Network Environment
Network Environment
System requirements
The system requirements, which vary depending on your network, are as follows.
• Printing over a TCP/IP network (when using IPv4)
• Compatible operating systems
• Windows XP
• Windows Server 2003
• Windows Vista
• Windows Server 2008
• Windows 7
• Windows Server 2003 x64
• Windows Vista x64
• Windows Server 2008 x64
• Windows 7 x64
• Mac OS X v10.2.8 or later
• Unix (Solaris 9)
• Unix (Red Hat 9)
• Printing over a TCP/IP network (when using IPv6)
• Compatible operating systems
• Windows Vista
• Windows Server 2008
• Windows 7
• Windows Vista x64
• Windows Server 2008 x64
• Windows 7 x64
• Mac OS X v10.3.9 or later
Note
• When using IPv6, you must specify IPv6 on the Control Panel or in RemoteUI. For instructions, "Configuring TCP/IPv6
Network Settings"
→
P.714 or see "Configuring the Printer's TCP/IP Network Settings With RemoteUI."
→
P.715
• The imagePROGRAF printer driver is supported in Mac OS X v10.5.8 or later.
• The imagePROGRAF printer driver is not compatible with Unix.
• Printing over an AppleTalk network
• Compatible operating systems
• Mac OS X v10.2.8–10.4
Note
• The printer cannot be used over a LocalTalk network.
• Compatible with EtherTalk Phase 2.
• The imagePROGRAF printer driver is not compatible with AppleTalk.
•
Printing over a NetWare network
• Compatible servers
• Novell NetWare 4.2/5.1/6.0
• Compatible clients
Network Environment
iPF8400
User's Guide
Network Setting Network Environment
706

Canon imagePROGRAF iPF8400 Specifications

General

Internal storage capacity	250 GB