10
Select the B Borderless Printing check box to display
the Information dialog box.
11
Select the width of the loaded roll in the Roll Paper Width list—in this case, click 10-in. Roll (254.0mm).
12
Click OK to close the Information dialog box.
13
In C Borderless Printing Method, click F Print Image with Actual Size.
14
Confirm the print settings and print as desired.
Note
• For tips on confirming print settings, see "Confirming Print Settings ."
→
P.180
Borderless Printing at Actual Size (Mac OS X)
Borderless Printing at Actual Size (Mac OS X)
This topic describes how to print borderlessly at actual size based on the following example.
Important
• When borderless printing is used, the edge of the paper is cut during printing. Thus, ink density may be uneven at the edges.
If you require higher image quality, select No from the Automatic Cutting list in the Paper Detailed Settings dialog box. In
this case, the paper can be printed without borders on the left and right sides only. Once printed and cut, please cut the
upper and lower bands with scissors.
•
Document: Any type
•
Page size: 10 × 12 inches (254.0×304.8 mm)–Borderless
•
Paper: Roll
•
Paper type: Canon Heavyweight Coated Paper
•
Roll paper width: 10 inches (254.0 mm)
Borderless Printing at Actual Size (Mac OS X)
iPF8400
User's Guide
Enhanced Printing Options Printing at full size
94
To Next Page
Loading...
