Switching Display Units
Switching Display Units
The units displayed in the Color Calibration Management Console can be switched between millimeters and inches.
1
Select Preferences in the imagePROGRAF Color Calibration Management Console menu.
2
Select the display units in the Units sheet in the Prefer-
ences dialog box and then click the
button.
Getting Audio Notification of Color Calibration Finished
Getting Audio Notification of Color Calibration Finished
You can be notified by sound when color calibration finishes.
1
Select Preferences in the imagePROGRAF Color Calibration Management Console menu.
2
Select the Color Calibration check box in the Sound
sheet in the Preferences dialog box and then click the
Browse button and select the audio file.
Note
• If you want to check the sound in the selected audio file, click the Test button.
3
Click the button.
iPF8400
Switching Display Units (Mac OS X)
User's Guide
Color Management Color Calibration Management Console (Mac OS X)
905
To Next Page
Loading...
