Canon imagePROGRAF iPF8400 - Mediatype Mismatch; Messages Regarding Paper; Paper Mismatch

Messages regarding paper
Messages regarding paper
Paper mismatch ..................................................................................................................................................................... 992
MediaType Mismatch .......................................................................................................................................................... 992
The paper is too small. ........................................................................................................................................................ 993
The paper is too small. ........................................................................................................................................................ 993
PaprWidth Mismatch ........................................................................................................................................................... 994
Paper size not detected. .................................................................................................................................................... 994
Insufficient paper for job ................................................................................................................................................... 995
This paper cannot be used as size is not supported. ........................................................................................... 995
Cannot execute this command. Use other paper. ................................................................................................ 1004
Roll printing is selected. ..................................................................................................................................................... 996
Roll printing is selected, but sheets are loaded. ...................................................................................................... 996
The roll is empty. ................................................................................................................................................................... 996
No sheets. ................................................................................................................................................................................. 997
Sheet printing is selected. ................................................................................................................................................. 997
Regular printing is selected, but a roll is loaded. .................................................................................................... 997
Paper jam. ................................................................................................................................................................................. 998
Paper loaded askew. ............................................................................................................................................................ 998
Cannot detect papr .............................................................................................................................................................. 998
Cannot feed paper. ............................................................................................................................................................. 999
Cannot cut this paper. ........................................................................................................................................................ 999
End of paper feed. ................................................................................................................................................................ 999
Rel lever is in wrong position. .......................................................................................................................................... 999
Rewinding error. .................................................................................................................................................................. 1000
Media take-up unit ready. ................................................................................................................................................ 1000
Turn on the media take-up unit. ................................................................................................................................... 1000
Borderless printng not possible. .................................................................................................................................. 1000
Paper position not suitable for borderless printing. ............................................................................................ 1001
Paper mismatch
Paper mismatch
Cause Corrective Action
You tried to print a test pattern for printer adjustment on
several sheets, but sheets of different types or sizes of pa-
per were used.
When printing a test pattern for adjustment, use sheets of the same size and type
of paper, in the required quantity.
Press ▲ or ▼ to select Change Paper, press the OK button, and replace the pa-
per.
(See "Loading and Printing on Sheets.")
→
P.27
The printer now starts printing the test pattern.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
MediaType Mismatch
MediaType Mismatch
Cause Corrective Action
When Detect Mismatch in the Control Panel menu
is set to Pause, the type of paper loaded does not
match the type specified in the printer driver.
Follow these steps to ensure the paper type matches on the printer and in the printer
driver.
1.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
2. Change the paper type setting in the printer driver to the type loaded in the printer
and try printing again.
Follow these steps to ensure the paper type matches on the printer and in the printer
driver.
Paper mismatch iPF8400
User's Guide
Error Message Messages regarding paper
992