Important
• If the imagePROGRAF Print Plug-In toolbar/ribbon is not displayed, refer to the following.
• When Print Plug-In for Office is not displayed
→
P.325
3
Check that the imagePROGRAF Print Plug-In toolbar/ribbon is
displayed.
4
Click the buttons on the toolbar/ribbon according to the items you want to set.
Icon Contents
Menu
Displays the About, Help, and Special Settings dialog boxes. (See "Configuring Special Set-
tings.")
→
P.360
Printer list
Select Printer.
If you select Show All Printers, the imagePROGRAF printers will be displayed again. Select
this when you want to display all printer drivers or update the display.
Print Button
The print Wizard is displayed.
The settings Print Entire Sheet and Print Selected Area can be set.
Printing Wizard dialog box
Important
• If you want to change the display to another file or application while the Printing Wizard is open, close the Print-
ing Wizard dialog box. Otherwise, you may not be able to change displays or operate the toolbar/ribbon.
• The Printing Wizard will not start if you click the Print button on the toolbar/ribbon while editing a cell.
• When more than one worksheet is selected, the Printing Wizard cannot be run. Select only one worksheet and
click Print again.
• When an object is selected, the Printing Wizard is not started if you click the Print button on the toolbar/ribbon.
• If the paper size in Excel is blank, the Printing Wizard cannot be run. From the File menu in Excel, select Page
Setup and check Paper size.
iPF8400
To start from Microsoft Excel (Windows)
User's Guide
Windows Software Print Plug-In for Office
353
To Next Page
Loading...
Need help?
General
