•
If no print job was received
1.
Press the Load button.
2.
Press ▲ or ▼ to select "Load Cut Sheet", and then press the OK button.
Note
• If any paper has been advanced that will not be used, a message is shown requesting you to remove it.
Press ▲ or ▼ to select "Yes", and then press the OK button. Remove the paper and go to the next step.
2
Lift the Release Lever and open the Top Cover.
Loading Sheets in the Printer
iPF8400
User's Guide
Handling and Use of Paper Handling sheets
562
To Next Page
Loading...
