Canon imagePROGRAF iPF8400 - Page 786

• Password
Enter the password. (This field is limited to four digits in the range 0001–9999.)
• Re-enter to confirm
Re-enter the password to confirm it.
For details, refer to the imagePROGRAF Status Monitor help file.
Using imagePROGRAF Printmonitor (Macintosh)
1
On the Hard Disk pane, click ▶ by Inbox No./Name.
Select a saved job in the list and click Set.
2 In the Settings dialog box, specify the password and click OK.
• Set password
Select the check box.
• Password
Enter the password. (This field is limited to four digits in the range 0001–9999.)
• Verify
Re-enter the password to confirm it.
Setting Passwords for Personal Boxes iPF8400
User's Guide
Print Job Management Advanced Print Job Operations
786