Confirm the message
When the Maintenance Cartridge is almost empty, a message is shown on the Display Screen. According to the mes-
sage, replace the Maintenance Cartridge or prepare a new Maintenance Cartridge. (See "When to Replace the Mainte-
nance Cartridge.")
→
P.942
If a message is displayed requesting Maintenance Cartridge replacement, you can skip the step Access the menu for
Maintenance Cartridge replacement. Follow the instructions in Replace the Maintenance Cartridge.
Important
• Do not replace the Maintenance Cartridge during initialization immediately after turning on the printer, during Printhead
cleaning, or when ink is being absorbed. Ink may leak out.
Access the menu for Maintenance Cartridge replacement
1
On the Tab Selection screen of the Control Panel, press â—€ or â–¶ to se-
lect the Settings/Adj. tab ( ).
Note
• If the Tab Selection screen is not displayed, press the Menu button.
2
Press the OK button.
The Set./Adj. Menu is displayed.
3
Press â–² or â–¼ to select Maintenance, and then press the OK button.
4
Press â–² or â–¼ to select Repl. maint cart, and then press the OK button.
Instructions are displayed on the Display Screen.
iPF8400
Replacing the Maintenance Cartridge
User's Guide
Maintenance and Consumables Maintenance Cartridge
935
To Next Page
Loading...
Need help?
General
