9
Select the print target in the E Print Target list.
Important
• When you are using paper that takes longer for ink to adhere for borderless printing and the Cutter Unit touches
printing surfaces that are not dry yet, it may damage the paper or the edge of the document that is cut, depending
on frequency of use. In this kind of situation, change the ink drying time in Between Pages in the Paper Detailed
Settings dialog box.
10
Access the Page Setup pane.
11
Select and click a roll paper in the A Paper Source list.
12
Confirm that the roll paper width matches the paper size.
Make sure the width of the loaded roll is displayed in the B Roll Width list—in this case, 10 in. (254.0mm).
Note
•
If the width of the loaded roll is not displayed in B Roll
Width, click L Printer Information on the Main pane and
update the printer information.
Borderless Printing at Actual Size (Mac OS X)
iPF8400
User's Guide
Enhanced Printing Options Printing at full size
96
To Next Page
Loading...
Need help?
General
