Printing Document in Center of Paper
When you want to position the source document in the middle of the cut sheet and print, or print with even
margins on the right and left in relation to the width of the roll paper, use the Print Centered function.
The print results when setting with Print Centered are as follows. Normally, if Print Centered is set when
printed as in (A), it will be printed as in (B) for cut sheet and (C) for roll paper.
Note
• When setting the magnification using Scaling from Enlarged/Reduced Printing on the Page Setup
tab and printing, the start point for enlarge/reduce will always be fixed based on the top left corner of
that page. For that reason, for reduced printing, the bottom and right margins of the paper will increase.
At this time, if you place a checkmark next to Print Centered on the Layout tab, the top, bottom, left
and right margins can all be printed evenly.
The procedure for printing in the center of the paper is as follows:
1. Open the printer driver setup window1.
2. Select the media type2.
Select the type of paper loaded in the printer from the Media Type list on the Main tab.
If Auto (Use Printer Settings) is selected, the paper configured in printer settings is printed.
161
To Next Page
Loading...
Need help?
General
Weight and Dimensions
